
Characteristic:
Automatic high-speed hot-forming machines HSPF-888, using the latest plastic sheet forming process, set machine. Electricity. Gas integration design, human-machine interface operation, by the feed. Angioplasty. Edge. Stacker. Crimping expected to achieve a sheet of plastic forming equipment.
For PS, HIPS, PVC, PET, PP and other plastic sheet forming, mainly producing all kinds of boxes, plates, bowls, electronic tray, lid and other plastic containers and packaging products. Fruits such as boxes, cake boxes,, medicine trays, electron transfer trays, toys and packaging.
Product features:
1, equipment is to roll-shaped heated thermoplastic sheet to the mold through the
air (positive pressure), vacuum (negative pressure) and mold cooling after
forming, with the exception of punch into the side - the collection of products -
crimping disposable material finish The fully automated machinery.
2, the design of mechanical transmission on the use of a gear and cam combination
of equipment makes up the structure of simple,easy maintenance, good durability.
Are the main part of transmission to drive the servo motor, transmission precision,
low noise, vibration small.
3, electrical control, the use of industrial computer control, human-machine interface
operation, the control system data bus to connect through advanced technology,
control is simple, safe, reliable, and easy maintenance upgrade.
4, a more advanced machine design, mold installation fast and convenient, the use
of an automatic locking and automatic positioning of the device, save time and
manpower .
Technique Specifications:
|
£¦#12288; |
Forming the largest area |
580mm*780mm |
Forming the smallest area |
350mm*410mm |
Die width |
810mm*380mm |
Die length |
600mm*320mm |
Max sheet |
830mm |
Min Sheet |
350mm |
Expected size |
15mm |
Max sheet thickness |
1.5mm |
Extensive sheet |
0.2mm |
Feeding accuracy |
0.15mm |
Feeding up |
650mm |
Minimum feed |
300mm |
High on forming |
125mm |
Forming a high degree of under |
125mm |
travel mode of Units |
170mm |
travel mode of Units |
190mm |
Travel frame |
160mm |
Furnace on the length |
1800mm |
Under the furnace length |
1800mm |
Vacuum volume |
200m3/h |
Die force |
300KN |
The maximum air pressure forming |
6bar |
litres gas volume |
300litres |
System pressure |
6bar |
Forming the fastest rat |
30Times/min |
Distance from the sheet |
1600mm |
Machine length |
11000mm |
Machine width |
4500mm |
Overall height |
3400mm |
The total weight |
15500kg |
Furnace the total power |
42kw |
Furnace under the total power |
42kw |
Vacuum Pump |
5kw |
Drive motor |
52.8kw |
Pull-chip motor |
13.2kw |
The maximum air pressure forming |
160kw |
|